StellaVita is a smart astronomical controller from ToupTek Astro that can control different astronomical equipment from multiple brands. On Jan 31st 2026, the new StellaVita App was launched for the Android system. The iOS App will be released around the initial March 2026.
So, how to upgrade the StellaVita App from version 1.0 to version 2.0? Let's read through this guide and start trying the StellaVita new App!
Step 1: Update ToupTek StellaVita App 1.0 Core Firmware to v1.1.68
Disconnect from StellaVita Wi-Fi and connect to another network.
In the ToupTek StellaVita 1.0 App, go to "Misc → Settings". Tap "Check for Updates" to download the latest Core firmware.


After the download, reconnect to StellaVita Wi-Fi to install the update. A single "beep" sound indicates the update is complete.


Step 2: Install ToupTek StellaVita App 2.0
Uninstall the 1.0 App, then download the new StellaVita App. Once downloaded, connect to StellaVita Wi-Fi.
An update prompt will appear automatically, and the Core will begin upgrading to version 2.0.

When the progress bar reaches 100%, StellaVita will emit two sounds:
- Two short "beep-beep" sounds indicate the StellaVita hWi-Fi is active
- One long "beep" indicates StellaVita has fully re-started
Upon hearing the long beep, reconnect your device to StellaVita Wi-Fi. The upgrade is complete when it displays "Upgrade Successful."

Important Notes:
l During the upgrade process, do not disconnect the device, as this may cause malfunctions.
l If the progress bar stays at 100% for an extended period, try reconnecting to StellaVita Wi-Fi.
l After upgrading, it is recommended to verify that both the Core firmware and App version are the latest.

